https://developer.nvidia.com/embedded/jetson-nano-developer-kit
0. [J48] Power Select Header:
Not Connect= USB Power
Connect = Barrel Jack Power
1. [J28] USB micro B, 5V 2A
2. [J25] Power jack, 5V 4A (The maximum supported continuous current is 4.4A.)
** The critical point is that the Jetson Nano module requires a minimum of 4.75V to operate.
** Adafruit’s GEO151UB-6025 Power Supply (validated by NVIDIA for use with the Jetson Nano Developer Kit) is designed to provide 5.25V
-> some Micro-USB power supplies are designed to output slightly more than 5V to account for voltage loss across the cable
** The carrier board consumes between 0.5W (at 2A) and 1.25W (at 4A) with no peripherals attached.
** The default mode provides a 10W power budget for the modules, and the other, a 5W budget.
각종 자료
https://developer.nvidia.com/embedded/downloads#?tx=$product,jetson_nano
'IT > Platform' 카테고리의 다른 글
[FPGA] HDMI Solution (0) | 2022.02.03 |
---|---|
[RPi] 4B Tips (0) | 2022.02.03 |
[Beaglebone] OpenCV (0) | 2022.02.03 |
[Beaglebone] Expanding File System Partition On A microSD (0) | 2022.02.03 |
[Beaglebone] Debian & MAME (0) | 2022.02.03 |