[Ender 3] Dual Extruder 개조: 준비
1. 준비 사항
Dual Extruder 지원 보드 -> Tarantula 보드가 가능
MKS Base V1.4
2. Dual Hotend 지원 Mount
일단 수평형태의 direct extruder
https://www.thingiverse.com/thing:6075179
Ender 3 Neo Direct Drive by flyguyDHC14
Brings short Bowden tube piece in line for the Ender 3 Neo
www.thingiverse.com
https://www.thingiverse.com/thing:5911437
Ender 3 V2 Neo Direct Drive Front Facing by Zeltroix
Behold! A front facing DD mod for these printers, or is it backwards facing? Anyways I like the look of this, plus it doesn't affect your max Z height. Check out my channel I'll upload an installation guide soon No additional hardware required for this mod
www.thingiverse.com
3. X 축의 무게를 줄이기 위해서 작은 모터 사용이 필요
https://nasspop.com/product/detail.html?product_no=696&cate_no=227&display_group=1
듀얼기어 익스트루더 본텍 BMG - 내가 써본것만 팝니다! 내써팝!
상품결제정보 고액결제의 경우 안전을 위해 카드사에서 확인전화를 드릴 수도 있습니다. 확인과정에서 도난 카드의 사용이나 타인 명의의 주문등 정상적인 주문이 아니라고 판단될 경우 임의
nasspop.com
킹룬에서 쓰는 것과 같아보임
https://nasspop.com/product/detail.html?product_no=728&cate_no=233&display_group=1
엔더3 핫엔드 세트 ENDER-3 - 내가 써본것만 팝니다! 내써팝!
상품결제정보 고액결제의 경우 안전을 위해 카드사에서 확인전화를 드릴 수도 있습니다. 확인과정에서 도난 카드의 사용이나 타인 명의의 주문등 정상적인 주문이 아니라고 판단될 경우 임의
nasspop.com
12V용 히터
4. 기타
MKS Base V1.4 <-> Ender 3 Motor (6pin -> XH2.54) 케이블
MKS Base V1.4 Firmware 확인
MKS <-> Ender 3 LCD 연결가능 확인
MKS <-> CR touch ???
Marlin Firmware
https://marlinfw.org/meta/download/
Download
Download the latest Marlin source code
marlinfw.org
https://gulfcoast-robotics.com/pages/mks-gen-v1-4-electronics-firmware-and-hookup
MKS GEN V1.4 Electronics Firmware and Hookup
MKS GEN V1.4 (or BIQU BASE V1.0) Board is a well known board that is widely used on TEVO 3D printers. This is a full featured board in a small form factor, that is easy to configure and use in any 3D printer model. There is a Reprap.org MKS GEN Wiki page
gulfcoast-robotics.com
MKS & BL touch
https://m.blog.naver.com/noah7hd/221266338270
3D 프린터 - Tevo Tarantula BLTouch 센서
https://blog.naver.com/noah7hd/221210923152 Tevo 블랙위도우에 이어서 타란튤라에도 BLTouch 센서를...
blog.naver.com